skip to main content
Rust treatment

How to use JENOLITE

This original formulation is where the JENOLITE story begins. The products are easy to apply and there is no need to rinse off. You simply wipe the surface after application. You’ll see the rust disappear to leave a stable surface ready for priming and painting.


Good preparation is the key to a perfect finish. First remove any grease, dirt and loose rust or flaking paint.

Then, it’s a few simple steps:

  1. Apply JENOLITE Rust Remover directly to the rust.
  2. Wait 15 minutes
  3. Apply a second application. and immediately wipe dry with a clean cloth.
  4. The surface will be ready to prime in 30 minutes. Job done!
  5. JOB DONE!

    Specific instructions for use will vary whether you are applying the jelly, liquid or converter.

    For more detailed information download our ‘Technical Data Sheet’ and ‘Safety Data Sheet Sheet’.

    You can also take a look at our video demonstrations on the website.

Call us today on 01234 924 794 for more information on the product range or any other advice.

Our friendly, expert team will be happy to help.